TSP Series vertical slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
Wetted Parts
Liners – Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
Impeller – Hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush – Hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Feature
1.Single casing structure with the advantages of light weight, small volume, easy installation;
2.Anti-abrasive wet parts made of high-chrome alloys;
3.Transmission shaft and suction pipe could be chosen according to liquid surface of the slurry pool;
4.Slurry pump agitator could be installed to improve transfer efficiency;
5.Able to run smoothly under various speeds.
DOWNLOAD: About Ruite TSP slurry pump Operation manual
